Order Products : sales@su-jiao.com
Elastoprene HS5065A TR NAT
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | Elastoprene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kenUQM_ElastopreneHS5065ATRNAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastoprene HS5065A TR NAT is a translucent TPE for injection molding applications, offering good processibility, easy coloring, good heat resistance, and FDA compliance. Applications: Food containers, food closures, storage containers, general industrial and consumer goods applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 15 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D, 10 seconds, extruded | 61 | ASTM D2240 | |
| Shore D, 10 seconds, injection molding | 64 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.21 | MPa | ASTM D412 |
| Tensile Strength (Break) | 8.45 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Tear Strength | 28.9 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 21 | % | ASTM D395B |
| 70°C, 22 hr | 60 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 - 199 | °C | |
| Middle Temperature | 177 - 210 | °C | |
| Front Temperature | 191 - 221 | °C | |
| Nozzle Temperature | 199 - 229 | °C | |
| Processing (Melt) Temp | 199 - 221 | °C | |
| Mold Temperature | 10 - 49 | °C | |
| Injection Pressure | 5.17 - 8.96 | MPa | |
| Injection Rate | Fast | ||
| Screw Speed | 50 - 200 | rpm | |
| Clamp Tonnage | 2.8 - 4.8 | kN/cm² | |
| Cushion | 5.08 - 12.7 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APICAL 300AF929 | Kaneka Corporation | PI, TS | APICAL |
| Delta PPO 888 | Delta Polymers | PPE+PS | Delta |
| Epic Urethane D9970 | Epic Resins | PUR, Unspecified | Epic Urethane |
| Petlon R-Prime B2-G25-00-BK | Petlon Polymers Ltd | Nylon 6 | Petlon R-Prime |
| MAXAMID™ PA66-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
