Order Products : sales@su-jiao.com
Generic Nylon 66 - Stainless Steel Fiber
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kdwTxi_Generic-Nylon-66---Stainless-Steel-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66 - Stainless Steel Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 - 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 1.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2350 - 4220 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 48.3 - 82.7 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1720 - 5450 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 109 - 125 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 41 - 160 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 790 - 1100 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 17 - 1.3E+10 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 1.0 - 1.4E+3 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 - 82.2 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Processing (Melt) Temp | 273 - 308 | °C | |
| Mold Temperature | 86.0 - 90.4 | °C | |
| Injection Pressure | 86.2 - 87.0 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 66 - Stainless Steel FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermx® TE3002 | Celanese Corporation | PCT | Thermx® |
| Carbotex KFN-30T12 | Kotec Corporation | PC | Carbotex |
| HiFill® PA6 GF25 IM L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| PC-COM™ PC415-50 | Polymer Compounders Limited | PC | PC-COM™ |
| Braskem PP DR152.00 | Braskem Europe GmbH | PP Random Copolymer | Braskem PP |
