Order Products : sales@su-jiao.com
Elasthane™ 80A
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | DSM Biomedical Inc. |
| Trademark: | Elasthane™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kbLqZZ_Elasthane-80A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elasthane™ 80A is a Thermoplastic Polyurethane Elastomer (Polyether) (TPU-Polyether) product. It can be processed by extrusion and is available in North America. Applications of Elasthane™ 80A include medical/healthcare and food contact applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (224°C/1.2 kg) | 17 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| -- 1 | 4.5 | % | |
| -- 2 | 0.0 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 43.8 | MPa | ASTM D1708 |
| Tensile Stress | ASTM D1708 | ||
| 50% Strain | 9.51 | MPa | |
| 100% Strain | 5.83 | MPa | |
| 300% Strain | 3.63 | MPa | |
| Tensile Elongation (Break) | 600 | % | ASTM D1708 |
| Flexural Modulus - 1% Secant | 36.0 | MPa | ASTM D790 |
| Flexural Strength (5.0% Strain) | 1.55 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compression Set (25°C, 22 hr) | 23 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| CLTE - Flow | 1.8E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 6.70 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 171 to 193 | °C |
| Note Message | |
|---|---|
| 1 . | 4 in disk |
| 2 . | Flame bar |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TPUCO® TPUI-E95 | Taiwan PU Corporation | TPU-Polyester | TPUCO® |
| HIPOL™ F650 | Mitsui Chemicals, Inc. | PP, Unspecified | HIPOL™ |
| ICORENE® N2104 | ICO Polymers EMEA, A Division of A. Schulman | LDPE | ICORENE® |
| Panlite® LN-2250Y | TEIJIN LIMITED | PC | Panlite® |
| ESTOPLAST SR 1500BL83 | Ester Industries Ltd. | ABS | ESTOPLAST SR |
