Order Products : sales@su-jiao.com
Prime ABS 750
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Primex Plastics Corporation |
| Trademark: | Prime ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kaqMBz_Prime-ABS-750.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prime ABS 750 Is a general purpose ABS product that has good impact strength, and good hot strength for thermoforming. It is an amorphous thermoplastic material and therefore, processes easier than some other thermoplastic materials. Applications: Prime ABS 750 may be used for interior applications such as appliance parts, tub and shower wall surrounds, and interior automotive trim. With the addition of a weatherable cap it may also be used in many outdoor applications. Processing: Prime ABS 750 is rather easy to thermoform due to its exceptional hot strength. It can be formed on wood, epoxy, ceramic and or aluminum tools. The forming temperature has a range of 300 -350°F. For best results the mold temperature should be 150-190°F. In some cases it is necessary to dry the sheet before forming. Finishing: Parts made with Prime ABS 750 may be joined with machine screws, bolts, nuts, rivets, and spring steel fasteners. Thread cutting or thread-forming screws is an economical means of securing separate joints. Formed parts may be joined with Methylene Chloride if maximum impact strength is not required. Press and snap techniques and sonic welding may also be used for the bonding of Prime ABS 750. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures, Capabilities: Prime ABS 750 can be color matched to meet your specific requirements. Prime ABS 750 is available in Thicknesses from .030 - .400. Textures include; Calf Grain, HC, RM, Seville, Levant I, FL/HC and Diamond Plate. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 1.7 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.2 | MPa | ASTM D638 |
| Flexural Modulus | 1860 | MPa | ASTM D790 |
| Flexural Strength | 55.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | 120 | J/m | |
| 23°C | 340 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Annealed) | 92.2 | °C | ASTM D648 |
| Vicat Softening Temperature | 107 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(0.762 mm) | HB | UL 94 | |
| Flammability (> 1.27 mm) | Pass | FMVSS 302 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Thermoforming Molding Temperature | |||
| Forming Temperature | 149 to 177 | °C | |
| Mold Temperature | 66 to 88 | °C |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gardner Gloss (60°) | 90 | ASTM D523 |
| Note Message | |
|---|---|
| 1 . | >0.03 in |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| QR Resin QR-4000-GF10 | QTR, Inc. | PPE+PS+Nylon | QR Resin |
| Royalcast® 3109 | Chemtura | PUR-Ether | Royalcast® |
| AMTOPP CE18 | Inteplast Group | PP, Unspecified | AMTOPP |
| Delta ABR-1G40/1 | Delta Polymers | ABS | Delta |
| EQUATE PE EMDA-6200 | EQUATE Petrochemical Company KSCC | HDPE Copolymer | EQUATE PE |
