Order Products : sales@su-jiao.com
Plavis® MS
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | Comco Nylon GmbH |
| Trademark: | Plavis® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kaZYAR_PlavisMS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PLAVIS is a super engineering plastic. PLAVIS polyimide has a unique chemical structure with some of the highest properties availiable. Nitrogen bonded to 3 carbons is the critical part of the chain and imparts the plastic with remarkable features and benefits. DAELIM makes PLAVIS isostatic molded rods have uniform properties in all directions. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.58 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, Compression Molded) | 70 - 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 23°C) | 63.7 | MPa | ASTM D1708 |
| Tensile Elongation 2(Break, 23°C) | 4.0 | % | ASTM D1708 |
| Flexural Modulus | ASTM D790 | ||
| 23°C, molded | 3330 | MPa | ASTM D790 |
| 260°C, molding | 1860 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | ||
| 23°C, molded | 78.5 | MPa | ASTM D790 |
| 260°C, molding | 44.1 | MPa | ASTM D790 |
| Compressive Modulus 3 | 2450 | MPa | ASTM D695 |
| Compressive Strength 4 | ASTM D695 | ||
| 1% strain, 23°C | 34.3 | MPa | ASTM D695 |
| 10% strain, 23°C | 128 | MPa | ASTM D695 |
| Wear Rate | 33 | mm/sec |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| 2 . | Compression Molded |
| 3 . | Compression Molded |
| 4 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYsan FL100 F35 | Polykemi AB | SAN | POLYsan |
| Sylvin 2815-60 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Geon™ Vinyl Flexible B6DT0 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Escorene™ Ultra LD 727.22 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| Luran® S 757G | Styrolution | ASA | Luran® S |
