Order Products : sales@su-jiao.com
Cawiton® SN920
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Wittenburg B.V. |
| Trademark: | Cawiton® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kaSNtz_Cawiton-SN920.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Cawiton SN920 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe for injection molding. Primary attribute of Cawiton SN920: Copolymer. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.9 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 20 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Across Flow : 100% Strain | 0.600 | MPa | |
| Flow : 100% Strain | 0.700 | MPa | |
| Across Flow : 200% Strain | 0.800 | MPa | |
| Flow : 200% Strain | 1.00 | MPa | |
| Across Flow : 300% Strain | 1.10 | MPa | |
| Flow : 300% Strain | 1.20 | MPa | |
| Tensile Stress | ISO 37 | ||
| Across Flow : Yield | 4.00 | MPa | |
| Flow : Yield | 1.90 | MPa | |
| Tensile Elongation | ISO 37 | ||
| Across Flow : Break | 890 | % | |
| Flow : Break | 730 | % | |
| Tear Strength | ISO 34-1 | ||
| Across Flow | 17 | kN/m | |
| Flow | 13 | kN/m | |
| Compression Set (70°C, 22 hr) | 32 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) 1 | 166 | °C | DSC |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 30.0 to 60.0 | °C | |
| Rear Temperature | 160 to 200 | °C | |
| Middle Temperature | 170 to 210 | °C | |
| Front Temperature | 170 to 210 | °C | |
| Nozzle Temperature | 180 to 220 | °C | |
| Processing (Melt) Temp | 160 to 220 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Measured with a differential scanning calorimeter |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1303 TFE 20 | RTP Company | PPS | RTP |
| RTP 209 UV | RTP Company | Nylon 66 | RTP |
| Tekulon FR 645 | TEKUMA Kunststoff GmbH | PC | Tekulon |
| Lucent PC PC/PBT-0820 | Lucent Polymers, Inc. | PC+PBT | Lucent PC |
| LNP™ THERMOCOMP™ LF004E compound | SABIC Innovative Plastics | PEEK | LNP™ THERMOCOMP™ |
