Order Products : sales@su-jiao.com
BorPure™ MB5568
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | BorPure™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kYYgmG_BorPure-MB5568.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BorPure MB5568 is a multimodal, high-density polyethylene intended for injection and compression moulding with strong focus on organoleptic performance in combination with excellent ESCR. This grade is especially designed for beverage caps and closures for carbonated soft drinks and water. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.80 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 2.0 | % | |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 750 | hr | ASTM D1693B |
| FNCT 1(50°C) | 2.7 | day | ISO 16770 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (1.00 mm) | 1000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 26.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 9.0 | % | ISO 527-2/50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 to 250 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C | |
| Injection Rate | Fast |
| Note Message | |
|---|---|
| 1 . | 6 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unipren® Elastomers B3 PRTA010 40A UP312 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| Zytel® LC6601 BK551 | DuPont Performance Polymers | Nylon 612 | Zytel® |
| EMOPLEN® AR 1206 T2 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
| EMAC® SP2258 | Westlake Chemical Corporation | EMA | EMAC® |
| Durez® 33171 | SBHPP | Phenolic | Durez® |
