Order Products : sales@su-jiao.com
ESTOPLAST EP 4130GY150
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Ester Industries Ltd. |
| Trademark: | ESTOPLAST EP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kXIM4K_ESTOPLASTEP4130GY150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polybutylene Terephthalate - Flame Retardant, Mineral and Glass Fiber Reinforcement, 30% Automotive: Interior Parts and E&E parts Electrical & Electronic: Plug and Socket, MCB, RCCB and Energy Meter Parts |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.64 | g/cm³ | ASTM D792 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 0.30 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.15 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 90.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.4 | % | ASTM D638 |
| Flexural Strength | 140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 30 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 215 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 200 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.5 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 - 120 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 235 - 240 | °C | |
| Middle Temperature | 250 - 260 | °C | |
| Nozzle Temperature | 250 - 260 | °C | |
| Processing (Melt) Temp | 240 - 250 | °C | |
| Mold Temperature | 80 - 110 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PULSE™ GX70 | Trinseo | PC+ABS | PULSE™ |
| Fluoroplex CG 25 - GML | UNIFLON | PTFE | Fluoroplex |
| FORMULA P ELAN XP 515 | Putsch Kunststoffe GmbH | PP, Unspecified | FORMULA P |
| GAPEX® FPP20GQ14HB | Ferro Corporation | PP, Unspecified | GAPEX® |
| Indorama PET 1101 B-PET | Indorama Ventures Polymers México | PET | Indorama PET |
