Order Products : sales@su-jiao.com
MEGOLON™ S336
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | AlphaGary |
| Trademark: | MEGOLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kUlVsX_MEGOLON-S336.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MEGOLON™ S336 is a thermoplastic, halogen free, fire retardant cable sheathing compound. It has been developed to exhibit high levels of fire retardancy, enabling designs of cables to meet more stringent fire test specifications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.63 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 0.60 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 10.0 | MPa | IEC 60811-1-1 |
| Tensile Strain (Break) | 150 | % | IEC 60811-1-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Elongation (-15°C) | 40 | % | IEC 811-1-4 |
| Hot Pressure Test (80°C) | 35 | % | IEC 811-3-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Smoke Density | ASTM E662 | ||
| Flaming mode : 1.50 mm 1 | < 65 | Ds | |
| Non-flaming mode : 1.50 mm 2 | < 130 | Ds | |
| Smoke Index (1.50 mm) | 11.0 | NES 711 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Acid Gas Evolution | 0.0 | % | IEC 60754-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Draw Down | 1.5:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.0 to 2.0:1.0 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 51 | % | ISO 4589-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 70.0 | °C | |
| Cylinder Zone 1 Temp. | 135 | °C | |
| Cylinder Zone 2 Temp. | 140 | °C | |
| Cylinder Zone 3 Temp. | 145 | °C | |
| Cylinder Zone 4 Temp. | 150 | °C | |
| Cylinder Zone 5 Temp. | 160 | °C | |
| Melt Temperature | 165 to 175 | °C | |
| Die Temperature | 165 | °C |
| Note Message | |
|---|---|
| 1 . | Time to maximum: 14 minutes |
| 2 . | Time to maximum: 18 minutes |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fainplast PVC GS 70 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Flontech® FT-WM20-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| GELAST GT59IT | Guang Sung Plastics (GSPL) | TP, Unspecified | GELAST |
| Plaslube® POM CO GF20 TL15 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
| Hypro-G™ PP-CP45 | Entec Polymers | PP Impact Copolymer | Hypro-G™ |
