Monprene® CP-38138 XRD1 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene CP-38138 XRD1 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-33138 XRD1 is a low density, low hardness grade that exhibits excellent elastic characteristics. This grade is suitable for both injection molding and extrusion.

General Information
Features	Low Specific Gravity Without Fillers Low density High elasticity Medium liquidity Good chemical resistance Lubrication Extended tensile rate Hardness, low
Uses	Safety equipment Handle Films Washer Rubber substitution Consumer goods application field Knob
RoHS Compliance	RoHS compliance
Appearance	Available colors Clear/transparent Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.878	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	6.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	40	ASTM D2240
Shaw A, 5 seconds	38	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	0.296	MPa	ASTM D412
Flow : 100% strain	1.73	MPa	ASTM D412
Transverse flow : 300% strain	0.476	MPa	ASTM D412
Flow : 300% strain	1.97	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	10.2	MPa	ASTM D412
Flow : Fracture	7.32	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	> 1000	%	ASTM D412
Flow : Fracture	> 1000	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	33.6	kN/m	ASTM D624
Flow	36.6	kN/m	ASTM D624
Compression Set ⁵(23°C, 22 hr)	11	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	188 - 227	°C
Middle Temperature	188 - 227	°C
Front Temperature	188 - 227	°C
Nozzle Temperature	188 - 227	°C
Processing (Melt) Temp	188 - 227	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	177 - 216	°C
Cylinder Zone 2 Temp.	177 - 216	°C
Cylinder Zone 3 Temp.	177 - 216	°C
Cylinder Zone 4 Temp.	177 - 216	°C
Cylinder Zone 5 Temp.	177 - 216	°C
Die Temperature	177 - 216	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kSg8R2_MonpreneCP38138XRD1PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Radilon® AGV HW 35 Black E	Radici Plastics	Nylon 66	Radilon®
Vyncolit® G865	Vyncolit N.V.	Phenolic	Vyncolit®
BLUESTAR® PBT 101G20	Nantong Zhonglan Engineering Plastics Co., Ltd.	PBT	BLUESTAR®
DAI-EL™ G-7210BP	DAIKIN AMERICA, INC.	Fluorelastomer	DAI-EL™
Rigidex® HM5420XPH	INEOS Olefins & Polymers Europe	HDPE, HMW	Rigidex®