Order Products : sales@su-jiao.com
Nymax™ 1308A HS BK13
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Nymax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kRzEdH_Nymax-1308A-HS-BK13.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PA66 compound with Heat Stabilized |
| General Information | |
|---|---|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 1.6 - 2.0 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 60.0 | MPa | ISO 527-2 |
| Flexural Modulus | 1800 | MPa | ISO 178 |
| Flexural Strength | 80.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 20 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 60.0 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+12 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 260 - 280 | °C | |
| Mold Temperature | 65.0 - 85.0 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ Fluoroplastic PVDF 60080001 | 3M Advanced Materials Division | PVDF | 3M™ Dyneon™ Fluoroplastic |
| NYLOY® MG-0033N | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| FHR EPS R-MER II® 5627 (1.50 lb/ft³) | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| Osterlene® LD-.25-918 | Osterman & Company | LDPE | Osterlene® |
| ULTEM™ AUT230 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
