Order Products : sales@su-jiao.com

Sasol Polymers PE HR486/06

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Sasol Polymers
Trademark:	Sasol Polymers PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kRGnI0_Sasol-Polymers-PE-HR486-06.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Features

High rigidity

Excellent impact strength

Excellent chemical resistance

Good ESCR

Heat and UV resistant

Tough and abrasion resistant

Colourable

Powder

Hexene copolymer

Applications

Large agricultural tanks

Large industrial tanks

Solar panels

Outdoor use

General Information
Additive	Antioxidant Mold Release UV Stabilizer
Features	Antioxidant Copolymer Food Contact Acceptable Good Abrasion Resistance Good Chemical Resistance Good Colorability Good Toughness Good UV Resistance Hexene Comonomer High ESCR (Stress Crack Resist.) High Impact Resistance High Rigidity Medium Heat Resistance
Uses	Agricultural Tanks Industrial Applications Outdoor Applications Solar Panels Tanks
Agency Ratings	FDA 21 CFR 177.1520
Forms	Powder
Processing Method	Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density	0.939	g/cm³	ASTM D1505
Apparent Density	0.33	g/cm³	ASTM D1895
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal CO-630, F50)	> 500	hr	ASTM D1693
Particle Size (< 600.0 µm)	90.0	%	ASTM D1921

Thermal	Nominal Value	Unit	Test Method
Impact Test ¹(-40°C)	350	J/cm	ASTM D3029

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	61		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²			ASTM D638
Yield	19.0	MPa
Break	24.0	MPa
Tensile Elongation ³(Break)	830	%	ASTM D638
Flexural Modulus	837	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	120	°C	ASTM D1525

Injection	Nominal Value	Unit
Processing (Melt) Temp	270 to 300	°C

Note Message
1 .	Tested on rotomoulded product
2 .	50 mm/min
3 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTV-2 GI-1100	Silicones, Inc.	Silicone Rubber, RTV-2	RTV-2
RTP 800 SI 2 HB	RTP Company	Acetal (POM) Copolymer	RTP
Radilon® S URV600L 100 NAT 4154	Radici Plastics	Nylon 6	Radilon®
Diakon® CMG314N	Lucite International Inc.	Acrylic (PMMA)	Diakon®
AKROMID® B3 GF 30 1 blue (5350)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®