Order Products : sales@su-jiao.com
QR Resin QR-2010
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | QTR, Inc. |
| Trademark: | QR Resin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kQnTB0_QR-Resin-QR-2010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Available with either high or low gloss. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 52.4 | MPa | ASTM D638 |
| Flexural Modulus | 2450 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 79.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 270 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 96.1 | °C | |
| 1.8 MPa, Unannealed | 85.0 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Rear Temperature | 193 to 232 | °C | |
| Middle Temperature | 210 to 249 | °C | |
| Front Temperature | 221 to 249 | °C | |
| Nozzle Temperature | 232 to 271 | °C | |
| Processing (Melt) Temp | 232 to 271 | °C | |
| Mold Temperature | 48.9 to 82.2 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 101-64 | ExxonMobil Chemical | TPV | Santoprene™ |
| NORYL™ NH5020 resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |
| ExxonMobil™ HDPE HD 7845.30 | ExxonMobil Chemical | HDPE, UHMW | ExxonMobil™ HDPE |
| Durez® 23570 (Injection) | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| OP - PC - Unfilled 912-FDA | Oxford Polymers | PC | OP - PC - Unfilled |
