Order Products : sales@su-jiao.com
Daplen™ MD250SY
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Borealis AG |
| Trademark: | Daplen™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kPRTL8_Daplen-MD250SY.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Daplen MD250SY is a 20% mineral filled polypropylene compound intended for injection moulding. It contains 50% post-consumer recycled polymer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.08 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.4 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus 1 | 2400 | MPa | ISO 178 |
| Flexural Stress | 37.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 1.3 | kJ/m² | |
| 23°C | 3.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 61.0 | °C | ISO 75-2/A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Emission | VDA 278 | ||
| FOG | 400 | µgHD/g | |
| VOC | 90.0 | µgTE/g |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV200L 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| RJM SN502G30 | RJM International, Inc. | Nylon 6 | RJM |
| SILPURAN® 2450 A/B | Wacker Chemie AG | Silicone | SILPURAN® |
| CompaDur® 121 GF 30 black (027) | DimeLika Plast GmbH | PBT | CompaDur® |
| Paracril OZO® 728C60 | INSA | PVC+NBR | Paracril OZO® |
