Order Products : sales@su-jiao.com
DISTRUMID 6 MI
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Distrupol |
| Trademark: | DISTRUMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kN1bn8_DISTRUMID-6-MI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DISTRUMID 6 MI is a polyamide 6 (nylon 6) material,. This product is available in Europe,. The main characteristics of DISTRUMID 6 MI are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.10 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.7 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 1.1 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | 92 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Yield) | 64.0 | 34.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 110 | 300 | % | ASTM D638 |
| Flexural Modulus | 2400 | 700 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 150 | -- | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 155 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 65.0 | -- | °C | ASTM D648 |
| Melting Temperature | 222 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+11 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+15 | 1.0E+11 | ohms·cm | ASTM D257 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | HB | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Continuous Service Temperature, S.P., No Stress: 75 °CResistance to Tracking, VDE 0303/1: KC>400 V |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Razalen® P121 | Razin™ Engineering Plastics | PP Impact Copolymer | Razalen® |
| RTP 101 HB | RTP Company | PP, Unspecified | RTP |
| NaturePlast PHE 001 | NaturePlast | PHA | NaturePlast |
| Okirol® E-5 | DIOKI d.d. | PS (EPS) | Okirol® |
| Pebax® 7033 SA 01 MED | Arkema | PEBA-Ether | Pebax® |
