Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion 87775
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kMqrF9_Geon-Vinyl-Rigid-Extrusion-87775.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion 87775 is a rigid polyvinyl chloride product,. It can be processed by extrusion molding of profiles and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Geon™Vinyl Rigid Extrusion 87775 applications include architectural applications and outdoor applications. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 1-41133-33 | ASTM D4216 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2760 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 44.5 | MPa | ASTM D638 |
| Flexural Modulus | 2740 | MPa | ASTM D790 |
| Flexural Strength | 80.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 23°C, 3.18mm, injection molding | 1400 | J/m | ASTM D256A |
| Transverse flow : 23°C, 3.18mm, molded | 120 | J/m | ASTM D256A |
| Flow : 23°C, 3.18mm, molded | 170 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 57.8 | J/cm | ASTM D4226 |
| 23°C 4 | 57.8 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 71.1 | °C | ASTM D648 |
| CLTE - Flow | 6.8E-5 | cm/cm/°C | ASTM D696 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Ease of Sizing | Good | ||
| 注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 182 - 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® T331C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| Sevrene® 3000-45A | Vi-Chem Corporation | TPE | Sevrene® |
| Eco-Solutions FT1 | MINIMA Technoloy Co. Ltd. | Biodeg Polymers | Eco-Solutions |
| OP - PEI 1000 | Oxford Polymers | PEI | OP - PEI |
| Sylvin 4299-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
