Order Products : sales@su-jiao.com
MACOMASS TPE MM-TPE O 1451
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | MACOMASS Verkaufs AG |
| Trademark: | MACOMASS TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kM3FzM_MACOMASS-TPE-MM-TPE-O-1451.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MACOMASS TPE MM-TPE O 1451 is a Thermoplastic Elastomer (TPE) material. It is available in Europe for extrusion. Important attributes of MACOMASS TPE MM-TPE O 1451 are:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.09 to 1.12 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.1 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 28 to 38 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 15.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | > 500 | % | ISO 37 |
| Tear Strength | > 25 | kN/m | ISO 34-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Melt Temperature | 160 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Addisil™ 170 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| AQUATUF® HMP-334 (Roto) | Ravago Manufacturing Americas, LLC | HDPE | AQUATUF® |
| Devlon PVC | Devol® Engineering Polymers | PVC, Unspecified | Devlon |
| Lasulf LASULF G/30 | LATI S.p.A. | PSU | Lasulf |
| Kinta R4-001 BK | Kinta Technology (Hong Kong) Co., Ltd. | PPS | Kinta |
