Rulon® W2

Category: PTFE , Polytetrafluoroethylene
Manufacturer: Saint Gobain Performance Plastics
Trademark: Rulon®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: kDxeI9_Rulon-W2.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Rulon® W2 is a black PTFE-based material developed for use in fresh-water applications. It exhibits low friction and excellent wear characteristics (one of the lowest wear rates in fresh water) as well as good thermal dissipation, preventing shaft distress. Its properties are enhanced when wet.

It is compatible with most metal substrates and soft mating surfaces. Rulon W2 is a good alternative to Rulon J when superior chemical resistance is needed. However, it should not be used on very soft mating surfaces or where electrical insulation is desired.
General Information
Features
  • Good Wear Resistance
  • Low Friction
Appearance
  • Black
PhysicalNominal ValueUnitTest Method
Specific Gravity 2.09g/cm³ASTM D792
MechanicalNominal ValueUnitTest Method
Tensile Strength 12.4MPaASTM D4894
Tensile Elongation (Break)70%ASTM D4894
Resin Grade Manufacturer Category Trademark
RTP 4405.3 HS L RTP Company Nylon, Unspecified RTP
TEREZ PA 6 7510 GF 15 GK 15 TER HELL PLASTIC GMBH Nylon 6 TEREZ PA 6
HIDEN® VH150U YUHWA Korea Petrochemical Ind. Co., Ltd. UHMWPE HIDEN®
LUVOCOM® 1850-7784 Lehmann & Voss & Co. PBT LUVOCOM®
Omnix® FC-4050 Solvay Specialty Polymers HPPA Omnix®