Order Products : sales@su-jiao.com
CERTENE™ SIM-080
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kDvkin_CERTENE-SIM-080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SIM-080 is a certified prime grade developed for INJECTION MOLDING applications requiring high Strength coupled with superior Gloss properties. SIM-080 offers excellent processability, exceptional consistency of melt viscosity that combined reduce injection pressure, shorten cycle time and minimize internal molding stresses, resulting in moldings free of Warpage and outstanding Impact strength. SIM-080 typical applications include appliance housings, housewares, furniture components, fan grids, scale models, toys, audio and video cassette shells, structural foam moldings, and blends with Crystal Polystyrene for improvement of mechanical properties. SIM-080 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 60 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2280 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 20.7 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 50 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 2340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 91.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 96.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene GC20P105-08FA | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| Monprene® IN-15074 | Teknor Apex Company | TPE | Monprene® |
| Formolene® HB5502S1 | Formosa Plastics Corporation, U.S.A. | HDPE | Formolene® |
| Haysite Plastics HCR-100 | Haysite Reinforced Plastics | Polyester, TS | Haysite Plastics |
| KOCETAL® EL304BK | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
