Order Products : sales@su-jiao.com
Sumitomo Silicone SI 9041A
| Category: | Silicone , Silicone |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo Silicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kBv0Aa_Sumitomo-Silicone-SI-9041A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SI 9041A is a long fiberglass reinforced silicone molding compound, which exhibits excellent high temperature properties in addition to good molding characteristics for transfer and compression molding. Meets the requirements of ASTM D5948 Type MSI-30. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.92 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.15 to 0.25 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.24 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 31.0 | MPa | ASTM D638 |
| Flexural Modulus | 14700 | MPa | ASTM D790 |
| Flexural Strength (Break) | 69.0 | MPa | ASTM D790 |
| Compressive Strength | 61.0 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 390 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed) | > 282 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| -- 2 | 4.9 | kV/mm | |
| -- 3 | 3.4 | kV/mm | |
| Dielectric Constant 4(1 MHz) | 4.00 | ASTM D150 | |
| Dissipation Factor 5(1 MHz) | 0.022 | ASTM D150 | |
| Arc Resistance | 189 | sec | ASTM D495 |
| Note Message | |
|---|---|
| 1 . | 60 Hz, Wet |
| 2 . | Method A (Short-Time) |
| 3 . | Method B (Step-by-Step) |
| 4 . | Wet |
| 5 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ryton® R-4-230NA | Solvay Specialty Polymers | PPS | Ryton® |
| DOW™ LLDPE DFDA-7059 NT 7 | The Dow Chemical Company | LLDPE | DOW™ LLDPE |
| Flontech® FT-GL5-M5-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Jam PE 12XF6 | Jam Petrochemical Company | LLDPE | Jam PE |
| Adflex 7634 XCP | LyondellBasell Industries | Polyolefin, Unspecified | Adflex |
