Evoprene™ G 618

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Mexichem Specialty Compounds Inc.
Trademark:	Evoprene™ G
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kABcFs_EvopreneG618.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Evoprene™G 618 is a thermoplastic elastomer (TPE) product,. It is available in North America or Europe. Features include: flame retardant/rated flame Flame Retardant

General Information
Additive	Flame retardancy
Features	Flame retardancy
RoHS Compliance	Contact manufacturer
Appearance	Opacity
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Density	1.18	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shaw A, 10 seconds, 6.50mm)	40		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain, 2.00 mm)	0.900	MPa	ISO 37
Tensile Stress (Yield, 2.00 mm)	3.60	MPa	ISO 37
Tensile Elongation (Break, 2.00 mm)	550	%	ISO 37
Tear Strength ¹(2.00 mm)	21	kN/m	ISO 34-1
Compression Set			ISO 815
22°C, 72 hr	15	%	ISO 815
70°C, 22 hr	29	%	ISO 815
100°C, 22 hr	49	%	ISO 815

Flammability	Nominal Value	Test Method
Flame Rating		UL 94
6.0 mm, BK	V-1	UL 94
6.0 mm, WT	V-1	UL 94

Additional Information
The value listed as Density, ISO 1183, was tested in accordance with ISO 2782 test methods.M-S, Alpha Gary Test Method: 14 kg/cm²M-S (Macklow Smith) flow measures force to extrude tape through die 10mm X 1mm. The higher the value the stiffer the flow (opposite to Melt Flow - MFI)Service Temperature: -40 to +120°COzone Resistance, 100 pphm, 200hrs, 20% strain, 35°C: No cracksOK for food contact: NoThermoplastic Compatability: PP

Additional Information

The value listed as Density, ISO 1183, was tested in accordance with ISO 2782 test methods.M-S, Alpha Gary Test Method: 14 kg/cm²M-S (Macklow Smith) flow measures force to extrude tape through die 10mm X 1mm. The higher the value the stiffer the flow (opposite to Melt Flow - MFI)Service Temperature: -40 to +120°COzone Resistance, 100 pphm, 200hrs, 20% strain, 35°C: No cracksOK for food contact: NoThermoplastic Compatability: PP

Note Message
1 .	Method B, right-angle specimen (without cut)

Resin Grade	Manufacturer	Category	Trademark
Polylink Polymer P-51015-GF(N)	Polylink Polymers (India) Ltd.	Nylon 6	Polylink Polymer
megol® CA 63 SV/P/FCX1	API SpA	SEBS	megol®
Sasol Polymers PE HR486/06	Sasol Polymers	LLDPE	Sasol Polymers PE
Altuglas® HFI-10	Altuglas International of Arkema Inc.	Acrylic (PMMA)	Altuglas®
Optix® CP-82	Plaskolite West, Inc.	Acrylic (PMMA)	Optix®