Order Products : sales@su-jiao.com
Estane® 58280 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k9rUeV_Estane-58280-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Polyether Thermoplastic Polyurethane (TPU) Special Feature: High resilience, with Low Tensile and Compression set Processes: Extrusion: Blown, Flat Die Cast Film, and Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 79 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C, 0.762 mm) | 16.2 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 45.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 6 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 3.80 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 6.80 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 24.9 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 750 | % | ASTM D412 |
| Tear Strength 1(0.762 mm) | 68.6 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 7.8 | % | ASTM D395 |
| 70°C, 22 hr | 23 | % | ASTM D395 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 177 - 180 | °C | |
| Cylinder Zone 2 Temp. | 183 - 193 | °C | |
| Cylinder Zone 3 Temp. | 193 - 199 | °C | |
| Cylinder Zone 4 Temp. | 199 - 204 | °C | |
| Adapter Temperature | 210 | °C | |
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| Screens: 20-40-80-20 meshDew Point: -40°CFeedthroat Cooling: YesScrew Cooling: NoScrew Speed: 20 to 70 rpm |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen RP210M | Shazand (Arak) Petrochemical Corporation | PP Random Copolymer | Moplen |
| Xuchuan XCW-TDC101 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Nylfor® B2 FR2/3A NERO | SO.F.TER. SPA | Nylon 6 | Nylfor® |
| DESLON™ 66 DSC201FR | DESCO Co., Ltd. | Nylon 66 | DESLON™ 66 |
| ESTOPLAST XU 225GY37 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
