Order Products : sales@su-jiao.com
MARPOL® LL6R 805
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k9nR9N_MARPOL-LL6R-805.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Recommended Applications: Playground equipment, toys, agricultural storage tanks, medium tanks, drums and chemical storage tanks. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal, Compression Molded, F50 | 300 | hr | |
| 100% Igepal, Compression Molded, F50 | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 12 | % | ASTM D638 |
| Flexural Modulus 3 | 689 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength (-40°C, 3.18 mm) | 61 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 50.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene RCC233-01 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| Starflam RF0052E | Eurostar Engineering Plastics | Nylon 66/6 | Starflam |
| THERMOLAST® K TC5PAN (Series: AD/PA) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Kotex K-20MRA | Kotec Corporation | PC | Kotex |
| ISORENE™ AA9C1-1001 | SABIC Innovative Plastics Europe | TPE | ISORENE™ |
