Order Products : sales@su-jiao.com
InnoTooling™ IE-644-03
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | InnoTooling™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k697tS_InnoTooling-IE-644-03.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IE-644-03 is a tough, abrasion resistant elastomer formulated for room temperature hand-batch processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Base Resin | 1.11 | g/cm³ | |
| Cured | 1.12 | g/cm³ | |
| Hardener | 1.16 | g/cm³ | |
| Molding Shrinkage - Flow | 0.20 | % | ASTM D2566 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 32 Mix Ratio by Weight: 34 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 180 to 300 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 2.4 | Pa·s | |
| 25°C 2 | 4.5 | Pa·s | |
| 25°C 3 | 5.0 | Pa·s | |
| Curing Time (25°C) | 1.7E+2 | hr | |
| Gel Time | 20 to 30 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 90 to 96 | ASTM D2240 | |
| Tensile Strength | 10.3 | MPa | ASTM D638 |
| Tensile Elongation at Break | 110 | % | ASTM D638 |
| Tear Strength | 30.6 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| 3 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 105 F | RTP Company | PP Homopolymer | RTP |
| SEETEC PP M1700 | LG Chem Ltd. | PP Impact Copolymer | SEETEC PP |
| AIE PA6 5010ST | Asia International Enterprise (Hong Kong) Limited | Nylon 6 | AIE PA6 |
| DURAFIDE® 7340A4 | Polyplastics Co., Ltd. | PPS | DURAFIDE® |
| Plaslube® AC-81/TF/20/Natl | Techmer Engineered Solutions | Acetal (POM) Homopolymer | Plaslube® |
