Order Products : sales@su-jiao.com
Andur 7500 DP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k62Yrc_Andur-7500-DP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 7500-DP is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 72 to 75 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.2 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 31.0 | MPa | ASTM D412 |
| 300% strain | 38.6 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 38.6 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 200 | % | ASTM D412 |
| Compression Set | 45 | % | ASTM D395B |
| Bayshore Resilience | 50 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 3.0 - 3.5 | min | |
| Demold Time (100°C) | 20 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 72 to 77Die C Tear, ASTM D1004: 800 pliAverage Split Tear, ASTM D1938: 280 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 7500 DP: 160-180°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AMTOPP TT30 | Inteplast Group | PP, Unspecified | AMTOPP |
| EnDura® Z95X | Precision Polymer Engineering Ltd. | NBR | EnDura® |
| OmniLon™ PA6 U GR25 BK1000 | OMNI Plastics, LLC | Nylon 6 | OmniLon™ |
| Plenco 02000 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
| Sylvin 5153-89 Red 6189 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
