Order Products : sales@su-jiao.com

ALKAMIX™ MB-6007

Category:	Unspecified , Unspecified
Manufacturer:	Marplex Australia Pty. Ltd.
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	k4U1Sd_ALKAMIX-MB-6007.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX™ MB-6007 is a slip masterbatch formulated with slip additive (Oleamide) at a concentration of 1.1percent. ALKAMIX™ MB-6007 can be added to polyethylene during extrusion to reduce the coefficient of friction. The level required will vary according to coefficient of friction desired, gauge of film and other factors such as the presence of other additives (including antiblocks, colourants / pigments, etc...). The maximum level of addition of ALKAMIX™ MB-6007 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 15 percent when added to a polyethylene formulation free of any slip additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

Message

ALKAMIX™ MB-6007 is a slip masterbatch formulated with slip additive (Oleamide) at a concentration of 1.1percent.

ALKAMIX™ MB-6007 can be added to polyethylene during extrusion to reduce the coefficient of friction. The level required will vary according to coefficient of friction desired, gauge of film and other factors such as the presence of other additives (including antiblocks, colourants / pigments, etc...).

The maximum level of addition of ALKAMIX™ MB-6007 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 15 percent when added to a polyethylene formulation free of any slip additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

General Information
Additive	Oleamide Slip (1%)
Uses	Masterbatch

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505

Injection	Nominal Value	Unit
Processing (Melt) Temp	< 200	°C

Resin Grade	Manufacturer	Category	Trademark
Stanyl® TW272B6	DSM Engineering Plastics	Nylon 46	Stanyl®
Ultraform® N 2770 K	BASF Corporation	Acetal (POM) Copolymer	Ultraform®
DOW™ Electrical & Telecommunications DFDA-1375 RD	The Dow Chemical Company	LLDPE	DOW™ Electrical & Telecommunications
DynaMix™ 2020ST-GF15	Polymer Dynamix	Nylon 66	DynaMix™
ULTEM™ 1285 resin	SABIC Innovative Plastics	PEI	ULTEM™