Order Products : sales@su-jiao.com
FRAGOM PR/6 92 UV NERO
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k43IAG_FRAGOM-PR-6-92-UV-NERO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM : is the trade-mark of our flame retardant halogen free polyolefine thermoplastic compounds. FRAGOM PR/6 92 UV NERO : is a flame retardant polyolefine thermoplastic compound having high temperature index, good oxygen index and interesting UV resistance suitable for cable sheathing. Suitable for armored cable sheath. Certify : CEI 2011 TM9, CEI 2022 II/III |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.47 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 12 | g/10 min | ASTM D1238 |
| Water absorption rate- 24 hr (100°C) | 13.0 | g/m² | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot pressing test- 4h at 80°C -Penetratrion | % | IEC 60811 | |
| Temperature index 1 | 320 | °C | NES 715 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | % | IEC 60754-1 | |
| Corrosive gases in flue gas- pH | > 4.30 | IEC 60754-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 185 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 14.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | 180 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 13 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -9.0 | % | IEC 60811 |
| Change in Tensile Strength | |||
| in Hydrocarbons | -18 | % | ENI 018 100 |
| 70°C, 4 hr, in SAE 20 oil | -17 | % | IEC 60811 |
| Change in Tensile Strain at Break | |||
| in Hydrocarbons | 5.0 | % | ENI 018 100 |
| 70°C, 4 hr, in SAE 20 oil | 2.0 | % | IEC 60811 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | BS 6622 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 36 | % | ASTM D2863 |
| Additional Information |
|---|
| Two different cooling zone are suggested; the first with temperature around 45/55 °C. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 150 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 170 | °C | |
| Die Temperature | 190 - 195 | °C |
| Note Message | |
|---|---|
| 1 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MN-818.T001-8001 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| WELLAMID Nylon 6600/50 GV 30 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| NEFTEKHIM PP 1510L (C30S) | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| Kepital® TS-25H | KEP Americas | Acetal (POM) Copolymer | Kepital® |
| XYLEX™ X7507 resin | SABIC Innovative Plastics | PC+Polyester | XYLEX™ |
