Order Products : sales@su-jiao.com
VESTOSINT® 1101 white
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Evonik Industries AG |
| Trademark: | VESTOSINT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k3sdD1_VESTOSINT-1101-white.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| VESTOSINT 1101 white is the standard fluidized bed coating powder based on polyamide 12. It is most suitable for the coating of wire goods. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Apparent Density | > 0.50 | g/cm³ | ISO 60 |
| Water Absorption | ISO 62 | ||
| Saturation, 100°C 1 | 1.7 | % | |
| Saturation, 23°C 2 | 1.2 | % | |
| Equilibrium, 23°C, 50% RH | 0.50 | % | |
| Particle Size Distribution | ISO 4610 | ||
| < 32.0 µm | wt% | ||
| < 100.0 µm | > 45.0 | wt% | |
| < 250.0 µm | 100.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 75 | ISO 868 | |
| Ball Indentation Hardness 3 | 101 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (100 Cycles, 500 g, CS-17 Wheel) | < 1.00 | mg | ASTM D1242 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 176 | °C | ISO 3146 |
| CLTE - Flow (23 to 55°C) | 1.0E-4 | cm/cm/°C | ISO 11359-2 |
| Specific Heat | 2270 | J/kg/°C | ASTM C351 |
| Thermal Conductivity | 0.22 to 0.27 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength 4 | 85 | kV/mm | IEC 60243-1 |
| Note Message | |
|---|---|
| 1 . | Immersion |
| 2 . | 96%RH |
| 3 . | H30 |
| 4 . | K20/P50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLARENE H616 | Dongbu Hannong Chemical | PS (HIPS) | SOLARENE |
| Niuk 20NT02 | Shanghai Niuk New Plastic Technology Co., Ltd. | ABS | Niuk |
| Aplax P0413GN | Ginar Technology Co., LTD. | PP, Unspecified | Aplax |
| Lifoflex® UV FLAM 70600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
| Plaslube® PA6/6,6 GF50 HS L | Techmer Engineered Solutions | Nylon 66/6 | Plaslube® |
