Order Products : sales@su-jiao.com
ESTACARB PC 0860GF V1
| Category: | PC , Polycarbonate |
| Manufacturer: | Cossa Polimeri S.r.l. |
| Trademark: | ESTACARB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | k0S5ql_ESTACARB-PC-0860GF-V1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ESTACARB PC 0860GF V1 is a polycarbonate (PC) product, which contains a 30% glass fiber reinforced material. It is available in Europe. Typical application areas are: electrical/electronic applications. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 - 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 70.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 5400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C | 70 | J/m | ASTM D256 |
| 23°C | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 150 | °C | ASTM D1525 1 |
| -- | 147 | °C | ASTM D1525 2 |
| Ball Indentation Temperature | 135 | °C | IEC 60598-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-1 | UL 94 | |
| 3.20 mm | V-1 | UL 94 | |
| Glow Wire Ignition Temperature | 960 | °C | IEC 60695-2-13 |
| Additional Information |
|---|
| Note: Ball Indention Temperature, IEC 60598-1 was tested in accordance with IEC 695-1-2. |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| 2 . | 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC5UVZ (Series: UV/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Durethan® BM 240 H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
| OnForce™ LFT PP-50LGF/001 Natural | PolyOne Corporation | PP Homopolymer | OnForce™ LFT |
| PELPRENE™ S9001 | TOYOBO America, Inc. | TPEE | PELPRENE™ |
| PERLER® N09X4001B00 | A.D. Compound S.p.A. | PP Homopolymer | PERLER® |
