Order Products : sales@su-jiao.com
DJSilicone NE-3270
| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iu9MOf_DJSilicone-NE-3270.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This product adopts high quality raw materials and special ingredients, which makes it own the following properties: excellent high and low temperature resistance, physical, mechanical and electrical properties. This rubber has very good transparency and physical, mechanical properties. Modifying silicone rubber for molding uses vulcanizor DMDBH while modifying silicone rubber for extrusion uses vulcanizor DCBP.It is suitable for producing all kinds of silicone rubber tubes, special rubber strips, accessories for cables, and parts of other electrical equipments. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.17 to 1.27 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 to 74 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 9 | % | ASTM D412 |
| Tensile Strength (Yield) | > 7.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 260 | % | ASTM D412 |
| Tear Strength | > 20.0 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 20 | kV/mm | ASTM D149 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8341-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| VINIKA® T133D | Mitsubishi Chemical Performance Polymers, Inc. | PVC, Rigid | VINIKA® |
| IROGRAN® A 92 P 4851 | Huntsman Corporation | TPU-Polyether | IROGRAN® |
| EPAMOULD 655D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
| OTECH PVC OW635A-Molding | OTECH Corporation | PVC, Unspecified | OTECH PVC |
