Order Products : sales@su-jiao.com

Europrene® SOL T 6414

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	isnhmI_Europrene-SOL-T-6414.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® SOL T 6414 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 40 % wt and diblock content is 22%. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6414 is a radial block copolymer, characterised by excellent dispersability, processability and thermo-oxidative resistance, combined with high strength, elongation and hardness. Main Applications Europrene® SOL T 6414 is designed for hot melt adhesive applications: the grade shows high compatibility with tackifiers and imparts low melt viscosities and an excellent balance of adhesive and cohesive properties to the hot melt products. The grade is also used in footwear compounds, particularly where smooth and glossy surface finishing is required. Characterized by the excellent processability, SOL T 6414 is widely used in the modification of polymers and in plastic recycling.

Message

Europrene® SOL T 6414 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 40 % wt and diblock content is 22%. A non-staining antioxidant system is added during the production process.

Key Features
Europrene® SOL T 6414 is a radial block copolymer, characterised by excellent dispersability, processability and thermo-oxidative resistance, combined with high strength, elongation and hardness.

Main Applications
Europrene® SOL T 6414 is designed for hot melt adhesive applications: the grade shows high compatibility with tackifiers and imparts low melt viscosities and an excellent balance of adhesive and cohesive properties to the hot melt products. The grade is also used in footwear compounds, particularly where smooth and glossy surface finishing is required. Characterized by the excellent processability, SOL T 6414 is widely used in the modification of polymers and in plastic recycling.

General Information
Additive	Antioxidant
Features	Antioxidant Block Copolymer Dispersible Good Processability High Elongation High Hardness High Strength Oxidation Resistant
Uses	Adhesives Compounding Footwear Plastics Modification
Forms	Pellets
Processing Method	Compounding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.950	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	11	g/10 min	ASTM D1238
Bound Styrene	40.0	%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	88		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	3.90	MPa	ASTM D412
Tensile Strength	26.0	MPa	ASTM D412
Tensile Elongation (Break)	850	%	ASTM D412

Fill Analysis	Nominal Value	Unit	Test Method
Brookfield Viscosity - Toluene sol., 25% wt	400	mPa·s	ASTM D1084

Additional Information	Nominal Value	Unit	Test Method
Diblock Content	22.0	wt%
Shelf Life	18	month

Resin Grade	Manufacturer	Category	Trademark
Starex WR-9330I	SAMSUNG SDI CO., LTD.	ASA	Starex
Arylmax® K7500GF30	Polymics, Ltd.	PAEK	Arylmax®
LNP™ THERMOCOMP™ KF005 compound	SABIC Innovative Plastics	Acetal (POM) Copolymer	LNP™ THERMOCOMP™
Plaslube® J-80/20/TF/15	Techmer Engineered Solutions	Acetal (POM) Copolymer	Plaslube®
Polifor® 15 CA/40 H-D NATURALE	SO.F.TER. SPA	PP Homopolymer	Polifor®