Order Products : sales@su-jiao.com
ASTAMID™ MA3ZK
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | ASTAMID™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | irwmWt_ASTAMID-MA3ZK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ASTAMID™ MA3ZK is a "super tough" impact modified, heat stabilised grade of Polyamide 66. ASTAMID™ MA3ZK is designed for use in applications requiring extreme impact toughness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.06 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.2 | -- | % | ASTM D955 |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 2.3 | -- | % | |
| Equilibrium, 23°C, 50% RH | 7.2 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus 1(3.20 mm) | 1850 | 900 | MPa | ASTM D638 |
| Tensile Strength 2(3.20 mm) | 50.0 | 40.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 3.20 mm) | 25 | > 50 | % | ASTM D638 |
| Flexural Modulus 4(3.20 mm) | 1800 | 850 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 900 J/m | No Break | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed, 3.20 mm | 128 | -- | °C | |
| 1.8 MPa, Unannealed, 3.20 mm | 62.0 | -- | °C | |
| CLTE - Flow | 8.5E-4 | -- | cm/cm/°C | ASTM D696 |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 to 85.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 220 to 240 | °C | |
| Middle Temperature | 240 to 260 | °C | |
| Front Temperature | 250 to 270 | °C | |
| Processing (Melt) Temp | 250 to 280 | °C | |
| Mold Temperature | 50.0 to 80.0 | °C | |
| Injection Pressure | 60.0 to 130 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.100 to 0.500 | MPa | |
| Screw Speed | 40 to 60 | rpm | |
| Clamp Tonnage | 3.0 to 5.0 | kN/cm² |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GA-8705 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E PVC |
| Shin-Etsu Elastomer FEA-241U | Shin-Etsu Silicones of America | Fluoro Si | Shin-Etsu Elastomer |
| Elexar® EL-8623 | Teknor Apex Company | TPE | Elexar® |
| LubriOne™ NI-30CF/15T-2S | PolyOne Corporation | Nylon 610 | LubriOne™ |
| PEARLSTICK® D40-70/33 | Lubrizol Advanced Materials, Inc. | TPU-Polyester | PEARLSTICK® |
