Order Products : sales@su-jiao.com
Bergamid™ XP6042701
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Bergamid™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | irWugA_Bergamid-XP6042701.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bergamid™XP6042701 is a polyamide 6 (nylon 6) product, which contains fillers of 30% glass fiber reinforced materials and 10% carbon fiber reinforced materials. It can be processed by injection molding and is available in the Asia-Pacific region. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.43 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 165 | MPa | ASTM D638 |
| Flexural Modulus | 9000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 90.0 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 215 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+9 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm, ALL) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Rear Temperature | 230 - 240 | °C | |
| Middle Temperature | 230 - 250 | °C | |
| Front Temperature | 240 - 260 | °C | |
| Nozzle Temperature | 240 - 260 | °C | |
| Mold Temperature | 70.0 - 90.0 | °C | |
| Injection Pressure | 100 - 150 | MPa | |
| Holding Pressure | 50.0 - 80.0 | MPa | |
| Back Pressure | 0.300 - 0.500 | MPa | |
| Screw Speed | 80 - 160 | rpm |
| Injection instructions |
|---|
| Injection Speed: 50 to 80%Holding Time: 3 to 9 secInjection Time: 1 to 3.5 secCycle Time: 18 to 60 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 NG1 GF 30 HLS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Tritan™ MX730 | Eastman Chemical Company | Copolyester | Tritan™ |
| Latamid 6 H2PX-V0 | LATI S.p.A. | Nylon 6 | Latamid |
| Durez® 37026 | SBHPP | Phenolic | Durez® |
| CERTENE™ SIM-080 | Muehlstein | PS (HIPS) | CERTENE™ |
