Order Products : sales@su-jiao.com

KPOL-HDPE HD K-0.75/952

Category:	HDPE , High Density Polyethylene
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ir8Yp9_KPOL-HDPE-HD-K-0-75-952.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

High Density Polyethylene Copolymer Extrusion - Blow Molding

Applications

KPOL - HD K-0.75/952 is specially formulated for the production of stretched tapes, monofilament and blown film.

Characterisitics

KPOL - HD K-0.75/952 is a medium molecular weight extrusion grade of high density polyethylene. If this product is used for food contact applications, then the user needs to ensure compliance with the requirements of relevant FDA regulations.

General Information
Additive	Antioxidant (300 to 600 ppm)
Features	Antioxidant Copolymer Food Contact Acceptable High Density Medium Molecular Weight
Uses	Blown Film Monofilaments Tape
Forms	Pellets
Processing Method	Blown Film Extrusion Extrusion Blow Molding Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.952	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.75	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance ¹
50°C, 3.18 mm, 100% Igepal CO-630, F50	15.0 to 20.0	hr	ASTM D1693A
50°C, 1.91 mm, 100% Igepal CO-630, F50	8.00 to 10.0	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 1 sec, 23°C)	65		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield)	30.3	MPa	ASTM D638
Tensile Elongation ³(Break)	> 300	%	ASTM D638
Flexural Modulus - Tangent ⁴(3.20 mm)	1650	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength	126	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	79.0	°C	ASTM D648
Brittleness Temperature ⁵	< -76.0	°C	ASTM D746A
Vicat Softening Temperature	130	°C	ASTM D1525 ⁶

Note Message
1 .	Grooved Specimen
2 .	Type IV, 50 mm/min
3 .	Type IV, 50 mm/min
4 .	13 mm/min
5 .	F50; 25 lbfXin
6 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Staramide AG8	Eurostar Engineering Plastics	Nylon 66	Staramide
AKROMID® A28 GF 15 1 natural (4382)	AKRO-PLASTIC GmbH	Nylon 66	AKROMID®
ARC ARC1950	ARC Resin Corporation	ABS	ARC
CERTENE™ LLHR-735U	Muehlstein	MDPE	CERTENE™
Mediprene® 500352M	ELASTO	SEBS	Mediprene®