Order Products : sales@su-jiao.com
Stat-Tech™ PC-15CF-15GF/000 BK002
| Category: | PC , Polycarbonate |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Stat-Tech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iqbTtS_Stat-Tech-PC-15CF-15GF-000-BK002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Stat-Tech™Conductive composite materials have anti-static, ESD and RFI/EMI shielding functions in key electronic equipment. These materials combine the advantages of engineering resins and selected reinforcing additives, such as carbon powder, carbon fiber, nickel-plated carbon fiber and stainless steel fiber. According to the application requirements, the conductivity level of these reinforcing additives is from low to high. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Molding Shrinkage (3.00 mm) | 0.10 - 0.20 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 140 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 2.5 - 3.5 | % | ASTM D638 |
| Flexural Modulus | 12000 | MPa | ASTM D790 |
| Flexural Strength | 215 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Injection Molded) | 120 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | 133 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 - 1.0E+5 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 130 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 280 - 300 | °C | |
| Mold Temperature | 80.0 - 100 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7600 FL HF | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Vatpol 203 | Vatan Plastik San. Tic. AS | PE, Unspecified | Vatpol |
| ELASTOSIL® AUX BATCH PT 1 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
| Huafon JF-W-AH6050B | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| CYCOLAC™ EX58F resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
