Order Products : sales@su-jiao.com

Valtec HS012

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	INDELPRO, S.A. de C.V.
Trademark:	Valtec
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ioSrFb_Valtec-HS012.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Valtec is the new controlled morphology polypropylene manufactured by Indelpro using the Spheripol process. Compared to ordinary pelletized polypropylene, Valtec could present advantages in terms of improved productivity, better processing and lower energy consumption. Valtec HS012 is a homopolymer particularly suitable for the extrusion of cast and water quenched blown film, used for applications where slip and anti-blocking agents are not required. The base resin in this product meets the requirements of the U.S. Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520.

Message

Valtec is the new controlled morphology polypropylene manufactured by Indelpro using the Spheripol process. Compared to ordinary pelletized polypropylene, Valtec could present advantages in terms of improved productivity, better processing and lower energy consumption. Valtec HS012 is a homopolymer particularly suitable for the extrusion of cast and water quenched blown film, used for applications where slip and anti-blocking agents are not required.

The base resin in this product meets the requirements of the U.S. Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520.

General Information
Features	Food Contact Acceptable Good Processing Stability High Rigidity Homopolymer Opticals
Uses	Cast Film Film Ribbons Tape
Agency Ratings	FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Cast Film Film Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	11	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	32.0	MPa	ASTM D638
Tensile Elongation (Yield)	10	%	ASTM D638
Flexural Modulus	1150	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	24	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	151	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Axiall PVC 8941	Axiall Corporation	PVC, Flexible	Axiall PVC
FRAGOM PR/900	Crosspolimeri S.p.A.	Polyolefin, Unspecified	FRAGOM
Eraclene® MR 80 U	Versalis S.p.A.	HDPE	Eraclene®
CYCOLAC™ G320A resin	SABIC Innovative Plastics Europe	ABS	CYCOLAC™
POCAN® BF 4235 000000	LANXESS Asia/Pacific	PBT	POCAN®