Order Products : sales@su-jiao.com
PLUSTEK PD120BK11
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | PLUSTEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | icD7Al_PLUSTEK-PD120BK11.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYAMIDE 12 UV STABILIZED FOR EXTRUSION APPLICATIONS. |
| General Information | |
|---|---|
| Additive |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.02 | g/cm³ | ASTM D792 |
| -- | 1.03 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| Saturation | 1.5 | % | ASTM D570 |
| Saturated, 23°C | 1.1 | % | ISO 62 |
| Balance | 0.70 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.70 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1100 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength (Yield) | 40.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 400 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 350 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 30.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 100 | J/m | ASTM D256 |
| 23°C | No Break | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 175 | °C | ISO 11357-3 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 215 - 255 | °C | |
| Middle Temperature | 220 - 260 | °C | |
| Front Temperature | 225 - 265 | °C | |
| Mold Temperature | 65.0 - 105 | °C | |
| Injection Pressure | 70.0 - 105 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 35.0 - 70.0 | MPa | |
| Back Pressure | 0.350 - 0.700 | MPa | |
| Screw Speed | 60 - 90 | rpm |
| Injection instructions |
|---|
| Fill Speed: 50 to 75 mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuye J-700C | Shandong Xuye New Materials Co., Ltd. | CPVC | Xuye |
| UNISOFT TPE™ ST-50A-CL-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| Leona™ 1402SH | Asahi Kasei Chemicals Corporation | Nylon 66 | Leona™ |
| MAJORIS DE027 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| Elexar® EL-8623A (PRELIMINARY DATA) | Teknor Apex Company | TPE | Elexar® |
