Order Products : sales@su-jiao.com
Ingeo™ 4043D
| Category: | PLA , Polylactic Acid |
| Manufacturer: | NatureWorks® LLC |
| Trademark: | Ingeo™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ibVUgV_Ingeo-4043D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ingeo 4043D - a product from NatureWorks LLC - can be converted into a biaxially oriented film with use temperatures up to 265°F (130°C). This film has excellent optics, good machinability and excellent twist and deadfold. These properties make 4043D film an ideal candidate for candy twist wrap and other packaging applications. Additional properties include advantageous barrier to flavor and grease and superior oil resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ASTM D1505 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| MD : 25 µm | 3310 | MPa | ASTM D882 |
| TD : 25 µm | 3860 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 110 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 145 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 160 | % | ASTM D882 |
| TD : Break, 25 µm | 100 | % | ASTM D882 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 15 | g | ASTM D1922 |
| TD : 25 µm | 13 | g | ASTM D1922 |
| Carbon Dioxide Transmission Rate | 2850 | cm³/m²/24 hr | Internal method |
| Oxygen Transmission Rate | 680 | cm³/m²/24 hr | ASTM D1434 |
| Water Vapor Transmission Rate | 380 | g·mm/m²/atm/24 hr | ASTM F1249 |
| Spencer Impact | 2.50 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 145 - 160 | °C | ASTM D3418 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (20°) | 90 | ASTM D1003 | |
| Haze | 2.1 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.025 | % | |
| Hopper Temperature | 45.0 | °C | |
| Cylinder Zone 1 Temp. | 179 | °C | |
| Cylinder Zone 2 Temp. | 191 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Adapter Temperature | 199 | °C | |
| Melt Temperature | 202 - 218 | °C | |
| Die Temperature | 199 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 20-100 rpmMD Draw Temp: 140-160°FTD Draw Temp : 160-175°FHeat Set Oven: 205-285°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rotofoam® 93050 | Polimeros Mexicanos s.a. de c.v. | LMDPE | Rotofoam® |
| FILLMA 5002F30C | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | FILLMA |
| ICORENE® 9105 V0 Grey 7005 | ICO Polymers EMEA, A Division of A. Schulman | LLDPE | ICORENE® |
| perfluorence Tribocompound CoPEEK+PTFEcg | perfluorence GmbH | PEEK+PTFE | perfluorence Tribocompound |
| Osterlene® MIPS131.4 | Osterman & Company | PS (MIPS) | Osterlene® |
