Order Products : sales@su-jiao.com
Alpha PVC GW 2403-1-VW1 NATURAL 105-LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ibODIP_Alpha-PVC-GW-2403-1-VW1-NATURAL-105-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A HIGH QUALITY, LEAD FREE, LOW TEMPERATURE, FLAME RETARDED, OIL & SUNLIGHT RESISTANT, 105C DEGREE JACKETING COMPOUND FOR TRAY CABLE APPLICATIONS. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 - 1.38 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 90 - 96 | ASTM D2240 | |
| Shaw A, 15 seconds | 84 - 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.762 mm | 17.9 | MPa | ASTM D412 |
| 1.91 mm | 15.9 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 320 | % | ASTM D412 |
| Fracture, 0.762mm | 300 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | 0.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -20 | % | UL Unspecified |
| Change in Tensile Strength 3(70°C, 4 hr, in ASTM #2 Oil) | -10 | % | UL Unspecified |
| Change in Ultimate Elongation 4(70°C, 4 hr, in ASTM #2 Oil) | -20 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -28.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (70°C) | 6.0E+11 | ohms·cm | ASTM D257 |
| Dielectric Constant (23°C, 100 MHz) | 2.95 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.023 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.813 mm) | V-0 | UL 94 | |
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 166 | °C | |
| Cylinder Zone 4 Temp. | 171 | °C | |
| Cylinder Zone 5 Temp. | 171 | °C | |
| Adapter Temperature | 171 | °C | |
| Melt Temperature | 168 - 174 | °C | |
| Die Temperature | 171 | °C |
| Extrusion instructions |
|---|
| Screw Design:A) Standard PVC Metering Screw, 3.0:1 CompressionB) Barrier Mixing ScrewC) Maddock Mixing Screw |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| 3 . | Thickness: 40 mil |
| 4 . | Thickness: 40 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Braskem PP HP 522J | Braskem | PP Homopolymer | Braskem PP |
| EOS PA 2200 Top Quality 1.0 | EOS GmbH | Nylon 12 | EOS |
| Lucky Enpla LPC100 | Lucky Enpla Co LTD | PC | Lucky Enpla |
| Pibifor® K2 GB/30 NATURALE | SO.F.TER. SPA | PBT | Pibifor® |
| LEXAN™ LS2 resin | SABIC Innovative Plastics | PC | LEXAN™ |
