Order Products : sales@su-jiao.com
TECOLITE KM-470(G)
| Category: | Phenolic , Phenolic |
| Manufacturer: | KYOCERA Chemical Corporation |
| Trademark: | TECOLITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iXDgiT_TECOLITE-KM-470-G-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Excellent flammability and Excellent properties. Raising the reliability of parts. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" are corresponding to the demand for raising the reliability of apparatus, such as flammability by UL regulation. "TECOLITE" have a good dimension stability under a use severe situation for a long period of time. Therefore, it is preeminent product for reliability parts. It is the best for a plug, commutators, heat-resistant electricity parts, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.57 | g/cm³ | |
| Molding Shrinkage | |||
| Flow 1 | 0.80 to 1.0 | % | |
| Flow 2 | 0.40 to 0.60 | % | |
| Across Flow 3 | 0.50 to 0.70 | % | |
| Water Absorption (Equilibrium) | < 0.30 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 88.0 to 108 | MPa | |
| Compressive Strength | 225 to 255 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 185 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | |||
| After Boiling | 1.0E+9 to 1.0E+10 | ohms | |
| As Molded | 1.0E+10 to 1.0E+11 | ohms | |
| Dielectric Strength | > 10 | kV/mm | |
| Arc Resistance | 180 | sec | |
| Comparative Tracking Index | 190 | V |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| 2 . | Compression Molding |
| 3 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXT SIGNATURE POMC HF-100 | NEXT Specialty Resins, Inc. | Acetal (POM) Copolymer | NEXT SIGNATURE |
| ALFATER XL® D50E 1SK0011 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| APEX® 74-8208-F | Teknor Apex Company | PVC, Flexible | APEX® |
| Geon™ Vinyl Dry Blend E7001 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Dry Blend |
| Kepital® F15-33 | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
