Order Products : sales@su-jiao.com
Isoplast® 202 LGF40 ETPU
| Category: | ETPU , Engineering Thermoplastic Polyurethane |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Isoplast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iV9ynH_Isoplast-202-LGF40-ETPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Type: Isoplast® 202 LGF 40 is an engineering thermoplastic polyurethane resin. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 12000 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 186 | MPa | |
| Break | 186 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 1.8 | % | |
| Break | 1.8 | % | |
| Flexural Modulus | 10000 | MPa | ASTM D790 |
| Flexural Strength | 338 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 270 | J/m | ASTM D256 |
| Instrumented Dart Impact | ASTM D3763 | ||
| -29°C | 14.0 | J | |
| 23°C | 17.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 166 | °C | |
| 1.8 MPa, Unannealed | 144 | °C | |
| Glass Transition Temperature | 138 | °C | ASTM D3418 |
| CLTE - Flow | 7.0E-6 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 100 | °C | |
| Processing (Melt) Temp | 240 to 260 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® 66 H2 G/25-V0KB1 BK3324 | BASF Corporation | Nylon 66 | Ultramid® |
| Akulon® K225-KV | DSM Engineering Plastics | Nylon 6 | Akulon® |
| ALTECH® PA6 B 2015/106 GF15 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Kumho ABS 750SH | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
| KRYSTALFLEX™ PE409 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
