Order Products : sales@su-jiao.com
Elastocon® 3390
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iREoeb_Elastocon3390.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 3390X is a colorable S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3390X is well suited for consumer goods and industrial applications. Elastocon® 3390X can be overmolded or coextruded onto polystyrene. Elastocon® 3390X is supplied as ready to use pellets in 1000 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 9.90 | MPa | ASTM D412 |
| Tensile Strength | 9.90 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 110 | % | ASTM D412 |
| Tear Strength | 45.2 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 188 - 199 | °C | |
| Front Temperature | 193 - 204 | °C | |
| Nozzle Temperature | 199 - 204 | °C | |
| Processing (Melt) Temp | 199 - 204 | °C | |
| Mold Temperature | 38 - 49 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 - 1.03 | MPa |
| Injection instructions |
|---|
| Elastocon® 3390 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 171 | °C | |
| Cylinder Zone 3 Temp. | 171 - 177 | °C | |
| Cylinder Zone 4 Temp. | 182 - 188 | °C | |
| Cylinder Zone 5 Temp. | 177 - 182 | °C | |
| Die Temperature | 160 - 171 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 75 to 125 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Syncure™ V0064G RoHS | PolyOne Corporation | XLPE | Syncure™ |
| ULTEM™ 2410EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Ultramid® B3WG6 BK00564 | BASF Corporation | Nylon 6 | Ultramid® |
| DECAL® 572R | Synres-Almoco BV | Phenolic | DECAL® |
| Plaslube® AC-80/TF/15 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
