Order Products : sales@su-jiao.com
RTP 399 X 141380 B
| Category: | PC , Polycarbonate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iOHNE3_RTP399X141380B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Permanently Static Dissipative - ESD Protection - PTFE Lubricated - Glass Fiber - Preliminary Datasheet |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 - 0.80 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay 1 | sec | FTMS 101C 4046.1 | |
| Surface Resistivity | < 1.0E+9 | ohms | ESD STM11.11 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Dew Point | -29 | °C | |
| Processing (Melt) Temp | 227 - 249 | °C | |
| Mold Temperature | 60 - 93 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Do not exceed 520 °F (270 °C) melt temperature.Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | MIL-PRF-81705D, 5kV to 50 V, 12% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 2800 B-75A | RTP Company | TPO (POE) | RTP |
| RAMSTER PF305G6 | Polyram Ram-On Industries | PBT | RAMSTER |
| Zytel® FN727 NC010A | DuPont Performance Polymers | Nylon 6 | Zytel® |
| Niuk 20NT04 | Shanghai Niuk New Plastic Technology Co., Ltd. | ABS | Niuk |
| CYCOLOY™ C2950HF resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
