Ajedium™ Films -- Udel® PSU P-1700 NT-11 Datasheet,PSU,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Udel® P-1700 polysulfones are tough, high-strength thermoplastics that are suitable for continuous use up to 300°F (149°C). Udel Film is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone films are highly resistant to mineral acids, alkali and salt solutions. Their resistance to detergents and hydrocarbon oils is good, but they will be attacked by polar solvents such as ketones, chlorinated hydrocarbons, and aromatic hydrocarbons. Electrical properties of Udel® PSU films are stable over a wide temperature range and after immersion in water or exposure to high humidity. The film is transparent, a light yellow color.

General Information
Features	Electron beam disinfection High strength Good disinfection Anti-gamma radiation Antioxidation alkali resistance Heat resistance, high Hydrolysis resistance acid resistance Good toughness Compliance of Food Exposure
Uses	Battery Electrical/Electronic Applications Electrical components Home appliance components Automotive Electronics Food service sector
Agency Ratings	FDA 21 CFR 177.1655 NSF Not Rated
RoHS Compliance	RoHS compliance
Appearance	Amber Natural color

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Water Absorption (24 hr)	0.30	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tear Resistance	945	J/cm	ASTM D1004

Films	Nominal Value	Unit	Test Method
Area coefficient	158	ft²/lb/mil
Film Thickness - Tested	30	µm
secant modulus			ASTM D882
MD	2300	MPa	ASTM D882
TD	2370	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	68.0	MPa	ASTM D882
TD : Yield	63.7	MPa	ASTM D882
MD : Fracture	58.3	MPa	ASTM D882
TD : Fracture	56.8	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Yield	5.5	%	ASTM D882
TD : Yield	5.1	%	ASTM D882
MD : Fracture	53	%	ASTM D882
TD : Fracture	35	%	ASTM D882
Dart Drop Impact	400	g	ASTM D1709

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	174	°C	ASTM D648
CLTE - Flow	5.6E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	3.0E+16	ohms·cm	ASTM D257
Dielectric Strength	130	kV/mm	ASTM D149
Dielectric Constant (1 kHz)	3.04		ASTM D150
Dissipation Factor (1 MHz)	6.0E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	26	%	ASTM D2863

Additional Information
Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For PSU film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Additional Information

Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For PSU film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Category:	PSU , Polysulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Ajedium™ Films
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	iO8Shu_Ajedium-Films----Udel-PSU-P-1700-NT-11.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Trovidur® EC	Röchling Engineering Plastics SE & Co. KG	PVC, Rigid	Trovidur®
AKROMID® A3 GF 30 S1 black 950058 (1365)	AKRO-PLASTIC GmbH	Nylon 66	AKROMID®
CMET TSR-839	CMET Inc.	Epoxy	CMET
EnCom F0 PC-ABS 2007	EnCom, Inc.	PC+ABS	EnCom
LNP™ COLORCOMP™ DX98735H compound	SABIC Innovative Plastics	PC	LNP™ COLORCOMP™