Order Products : sales@su-jiao.com
DISTRUMID 6 MF30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Distrupol |
| Trademark: | DISTRUMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iMrkPu_DISTRUMID-6-MF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DISTRUMID 6 MF30 is a polyamide 6 (nylon 6) material,. This product is available in Europe,. The main characteristics of DISTRUMID 6 MF30 are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.36 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 1.0 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 115 | 103 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Ultimate) | 80.0 | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 6.0 | 15 | % | ASTM D638 |
| Flexural Modulus | 5000 | 2200 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Unnotched Izod Impact | -- | No Break | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 200 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 135 | -- | °C | ASTM D648 |
| Vicat Softening Temperature | 210 | -- | °C | ASTM D1525 |
| Melting Temperature | 222 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+11 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+15 | 1.0E+11 | ohms·cm | ASTM D257 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | HB | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Continuous Service Temperature, S.P., No Stress: 110 °CResistance to Tracking, VDE 0303/1: KC>500 V |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo Epoxy E 2748-9641D | Sumitomo Bakelite North America, Inc. | Epoxy | Sumitomo Epoxy |
| TAISOX 2114 | Formosa Plastics Corporation | LLDPE | TAISOX |
| TAROMID B 280 G3 X0 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| ENVIROPLAS® ENV14-NC190 | ENVIROPLAS®, Inc. | PC | ENVIROPLAS® |
| POCAN® T 7391 POS151 900044 | LANXESS GmbH | PBT+PET | POCAN® |
