Order Products : sales@su-jiao.com
Clear Cote™ TECHNO-COTE™
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Club Kit, Inc. |
| Trademark: | Clear Cote™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iMQAfM_Clear-Cote-TECHNO-COTE-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECHNO-COTE™ by CLEAR COTE™ is a 3 Speed (2 to 1, by volume/weight ) high quality, laminating system. It is 100% Epoxy solids. It is designed for the rapid wet out of fiberglass, Kevlar, carbon fiber and other composite materials. This system can be purchased with any one of 3 different Activators depending up on the desired cure speed and pot life. The material has an easy to use 2 to 1 mix ratio (2 Parts resin to 1 Part Activator, by volume/weight ) that cures at room temperature with little to no blush to a tough, rigid, impact resistant plastic, with excellent resistance to water, chemicals, and solvents. This material is suitable for use in mechanical volume pumps, always mix these materials thoroughly and be sure to scrape the sides and bottom. As with all adhesive type compounds proper surface preparation is essential for good bond strength, additionally recoating of this material should be accomplished before the material is thoroughly cured generally in less then 24 hours. If the material has cured hard and tack free, a sanding and solvent wash will be necessary before recoating. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Distortion | |||
| -- 1 | 54 | °C | |
| -- 2 | 52 | °C | |
| -- 3 | 57 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | |||
| -- 4 | -40 to 66 | °C | |
| -- 5 | -40 to 66 | °C | |
| -- 6 | -40 to 66 | °C |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A 7 | Mix Ratio by Weight: 44 | ||
| Part B 8 | Mix Ratio by Weight: 46 | ||
| Part C 9 | Mix Ratio by Weight: 46 | ||
| Resin | Mix Ratio by Weight: 100 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 10 | Amber | ||
| -- 11 | Amber | ||
| -- 12 | Amber | ||
| -- 13 | Clear/Transparent | ||
| Viscosity | |||
| -- 14 | 0.20 | Pa·s | |
| -- 15 | 0.25 | Pa·s | |
| -- 16 | 0.40 | Pa·s | |
| -- 17 | 1.0 | Pa·s | |
| Gel Time | |||
| 25°C 18 | 15 | min | |
| 25°C 19 | 30 | min | |
| 25°C 20 | 1.5E+2 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness | |||
| Shore D 21 | 75 to 80 | ||
| Shore D 22 | 75 to 80 | ||
| Shore D 23 | 75 to 80 | ||
| Tensile Elongation at Break | |||
| -- 24 | 2.0 to 4.0 | % | |
| -- 25 | 3.0 to 5.0 | % | |
| -- 26 | 4.0 to 6.0 | % |
| Note Message | |
|---|---|
| 1 . | Medium Activator |
| 2 . | Slow Activator |
| 3 . | Fast Activator |
| 4 . | Slow Activator |
| 5 . | Medium Activator |
| 6 . | Fast Activator |
| 7 . | Slow Activator |
| 8 . | Medium Activator |
| 9 . | Fast Activator |
| 10 . | Medium Activator |
| 11 . | Fast Activator |
| 12 . | Slow Activator |
| 13 . | Laminating Resin |
| 14 . | Slow Activator |
| 15 . | Medium Activator |
| 16 . | Fast Activator |
| 17 . | Laminating Resin |
| 18 . | Fast Activator |
| 19 . | Medium Activator |
| 20 . | Slow Activator |
| 21 . | Fast Activator |
| 22 . | Medium Activator |
| 23 . | Slow Activator |
| 24 . | Fast Activator |
| 25 . | Medium Activator |
| 26 . | Slow Activator |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T-27 GF 40I | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Nanjing Hongrui PC C1000 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PC | Nanjing Hongrui PC |
| ADMER™ SF755A | Mitsui Chemicals America, Inc. | TPE | ADMER™ |
| Huafon HF-1380AC | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| InnoPlus LD2420K | PTT Global Chemical Public Company Limited | LDPE | InnoPlus |
