Order Products : sales@su-jiao.com

DAPCO™ 3042

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	DAPCO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	iLbUWT_DAPCO-3042.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DAPCO™ 3042 fast curing paste adhesive is a two-part, room temperature curing, epoxy-based, 100% solids, self-extinguishing, composite edge filling and insert potting material. The material has a convenient one-to-one mix ratio by volume. The product is available in a variety of kit sizes including 50 ml, 200 mil and 400 ml side-by-side cartridges. Features & Benefits: Thixotropic flow properties 100% solids content Room temperature cure Room temperature storage 180°F (82°C) performance Meets FAR 25.853 Fast cure rate allowing quicker production Suggested Applications: DAPCO 3011 is commonly used for potting, stiffening and edge filling of honeycomb core.

Message

DAPCO™ 3042 fast curing paste adhesive is a two-part, room temperature curing, epoxy-based, 100% solids, self-extinguishing, composite edge filling and insert potting material. The material has a convenient one-to-one mix ratio by volume. The product is available in a variety of kit sizes including 50 ml, 200 mil and 400 ml side-by-side cartridges.

Features & Benefits:
Thixotropic flow properties
100% solids content
Room temperature cure
Room temperature storage
180°F (82°C) performance
Meets FAR 25.853
Fast cure rate allowing quicker production

Suggested Applications:
DAPCO 3011 is commonly used for potting, stiffening and edge filling of honeycomb core.

General Information
Features	Fast Cure Good Adhesion High Stiffness Self Extinguishing Thixotropic
Uses	Adhesives Aerospace Applications
Agency Ratings	FAR 25.853
Appearance	White
Forms	Paste
Processing Method	Potting

Physical	Nominal Value	Unit
Specific Gravity
-- ¹	1.00	g/cm³
-- ²	1.10	g/cm³
-- ³	1.15	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness (Shore D)	70 to 80

Mechanical	Nominal Value	Unit
Tensile Strength (25°C)	24.1	MPa
Tensile Elongation (Break)	13	%
Compressive Strength
177°C	3.45	MPa
82°C	8.96	MPa
25°C	55.2	MPa

Thermoset	Nominal Value
Thermoset Components
Hardener	Mix Ratio by Weight: 1.0
Resin	Mix Ratio by Weight: 1.0

Note Message
1 .	Hardener, Part B
2 .	Mixed
3 .	Resin, Part A

Resin Grade	Manufacturer	Category	Trademark
RELENE® B 31101	Reliance Industries Limited	HDPE	RELENE®
Vistalon™ 2504	ExxonMobil Chemical	EPDM	Vistalon™
PERCOM® DCG20	A. Schulman Europe	PP Copolymer	PERCOM®
Sylvin 8220-39 Natural	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
Durethan® B 35 F 000000	LANXESS Corporation	Nylon 6	Durethan®