Order Products : sales@su-jiao.com
UBE Polyethylene V115
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iE2zbW_UBE-Polyethylene-V115.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Polyethylene V115 is a Polyethylene material. It is available in North America for film extrusion. Important attributes of UBE Polyethylene V115 are:
Typical application of UBE Polyethylene V115: Wrap |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 0.80 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 15.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 93 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 750 | % | ASTM D638 |
| Apparent Bending Modulus | 65.0 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 70.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® CLEAR G 850 Rnew L | Arkema | Nylon 11 | Rilsan® |
| Maxelast® P3740 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| VECTRA® E130i | Celanese Corporation | LCP | VECTRA® |
| LNP™ THERMOCOMP™ AF008 compound | SABIC Innovative Plastics | ABS | LNP™ THERMOCOMP™ |
| Dow ENDURANCE™ HFDC-4202 EC | The Dow Chemical Company | LDPE | Dow ENDURANCE™ |
