Order Products : sales@su-jiao.com

KMI PP KM-899IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	iCsl2C_KMIPPKM899IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-899IB is an ultra high flow impact PP resin for injection molding applications. It is reactor-made block PP, which exhibits high rigidity as well as excellent impact strength due to well-designed resin structure. In addition, it shows better shrinkage property than conventional impact PPs. It is suitable for the injection molding of large-scale articles, base-resin for PP compounds, and thin products. Characteristics: High flow ability: MI>100, reactor-made product Excellent balance between stiffness & imapct strength

Message

KM-899IB is an ultra high flow impact PP resin for injection molding applications. It is reactor-made block PP, which exhibits high rigidity as well as excellent impact strength due to well-designed resin structure. In addition, it shows better shrinkage property than conventional impact PPs. It is suitable for the injection molding of large-scale articles, base-resin for PP compounds, and thin products.

Characteristics:

High flow ability: MI>100, reactor-made product

Excellent balance between stiffness & imapct strength

General Information
Features	Block Copolymer Rigidity, high Impact copolymer Impact resistance, high High liquidity
Uses	Thin wall parts Composite
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	120	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	95		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	30.9	MPa	ASTM D638
Tensile Elongation (Break)	< 50	%	ASTM D638
Flexural Modulus	1620	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	39	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	125	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Premier LB01018 - CP	Premier Polymers, LLC.	LLDPE	Premier
TRIBIT® 1551GN15	Samyang Corporation	PBT	TRIBIT®
Braskem PE STN7006	Braskem America Inc.	LDPE	Braskem PE
Keltan® 0500R	LANXESS Buna GmbH	EPDM	Keltan®
LNP™ THERMOCOMP™ JF004EXP compound	SABIC Innovative Plastics	PESU	LNP™ THERMOCOMP™