Order Products : sales@su-jiao.com
Dryflex® 51395 V
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i7P47F_Dryflex-51395-V.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 51395 V: Thermoplastic Elastomer Base Material: TPV Hardness: 50 Shore D Service Temperature: -50°C to +135°C Colour: Black, but available in any colour shade Presentation: Free flowing pellets. May require pre-drying before processing. Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Excellent Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Across Flow : 100% Strain | 10.8 | MPa | |
| Flow : 100% Strain | 12.6 | MPa | |
| Tensile Stress | ISO 37 | ||
| Across Flow : Yield | 22.0 | MPa | |
| Flow : Yield | 16.0 | MPa | |
| Tensile Elongation | ISO 37 | ||
| Across Flow : Break | 800 | % | |
| Flow : Break | 550 | % | |
| Tear Strength 2 | ISO 34-1 | ||
| Across Flow | 110 | kN/m | |
| Flow | 120 | kN/m | |
| Compression Set 3 | ISO 815 | ||
| 23°C, 24 hr | 54 | % | |
| 70°C, 24 hr | 57 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 to 135 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 180 to 220 | °C | |
| Middle Temperature | 180 to 220 | °C | |
| Front Temperature | 180 to 220 | °C | |
| Mold Temperature | 15.0 to 50.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 200 to 220 | °C | |
| Cylinder Zone 2 Temp. | 200 to 220 | °C | |
| Cylinder Zone 3 Temp. | 200 to 220 | °C | |
| Cylinder Zone 4 Temp. | 200 to 220 | °C | |
| Cylinder Zone 5 Temp. | 200 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on shape of the detail and placement of gate |
| 2 . | Method C, Crescent |
| 3 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong Aobang TPU-Polyester 64-D | Shandong Aobang Chemical Technology Co.,Ltd. | TPU-Polyester | Shandong Aobang TPU-Polyester |
| SumiDurez PM 8375 | SumiDurez Singapore Pte Ltd | Phenolic | SumiDurez |
| LEXAN™ HPS1R resin | SABIC Innovative Plastics | PC | LEXAN™ |
| InnoTooling™ IE-9070 | Innovative Polymers, Inc. | TSU | InnoTooling™ |
| Starex HF-0680 | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
